Setup guide

Page 38 Dedicated Micros
To set up each camera with a VMD grid:
12. in the Alarms/VMD -> VMD web page click on Click here to VMD applet option to display
the video image and VMD grid, by default video input 1 will be displayed and the grid is divided
into 16 zones.
13. Select the video input you are configuring from the drop down menu.
14. Select zone you are configuring from the drop down box.
Function Description
24 Hour Alarm This will ensure that VMD is permanently enabled on the corresponding
input (24/7).
Record Still Image This will record (and mark the image by stating the word ‘ALARM’ in the
title) a still of the corresponding video input alongside the recording of
the event, access to the still is via the Live Page.
Protect VMD
Images
This will protect the whole recorded 50 Mbyte block of video regardless
of which camera(s) are recorded.
Create Zone Input This turns the VMD camera into an alarm input when used with the
Alarm Zones page, Select VMD1 instead of an alarm input to trigger the
event.
Archive Event This will mark the VMD event for automatic download to the FTP Server
identified or to the Archive list.
Email Image This will automatically e-mail a snapshot of the VMD incident to the
SMTP server identified. refer to Email configuration page for more
information.
Email Image
Resolution
This is a system setting, the selected resolution will affect any option
where snapshot images are possible, i.e. alarms, VMD, etc.
The setting identifies the resolution of the image that will be attached to
the e-mail as a result of an event.