Setup guide

Dedicated Micros Page 37
Function Description
Create Database
Entry
This will record an event in the database using the VMD Zone number
(refer to Alarm Zone below for more information).
Change Standard
Record Rate
This will set the alarm record rate across ALL cameras that are enabled
in the record sequence.
Change Variable
Record Rate
This will change the record rate of the corresponding camera ONLY,
make sure the camera is enabled in the Camera Input page (Refer to
the Quick Start Guide for enabling video inputs).
Report on VMD
Activity
This will automatically send a telnet alarm message to an allocated
Viewer, when the PC receives and accepts the alarm video is then
requested, refer to Alarm/VMD Reporting below for more detailed
information.
Day Operation This will enable the VMD zone when the unit is in Day operation mode
only.
Night Operation This will enable the VMD zone when the unit is in Night operation mode
only.
Weekend
Operation
This will enable the VMD zone when the unit is in Weekend operation
mode only.