Setup guide

Page 36 Dedicated Micros
To configuring the alarm action on identification of VMD:
9. In the Alarms/VMD -> VMD web page there are a number of system actions that can be
automatically initiated when VMD has been triggered, each camera can be individually
configured. Place a tick in the boxes of the VMD action under the corresponding camera input.
10. If an e-mail is to be sent on identification of an alarm it is possible to configure what
information will be contained in the e-mail, using the drop down box select the resolution of the
image to be sent.
11. Don’t forget to save the configuration of the alarm actions by selecting Save Settings!
Function Description
VMD Camera
Enable
This option will display all the video inputs on the Digital Sprite 2. Each
input can be individually enabled for VMD. Tick the box that corresponds
to the input that is to be set for VMD monitoring.
VMD pulse
extension
The pulse extension extends the trigger to avoid double triggers of VMD
from occurring, i.e. if a second incident of VMD is received on the same
input, after the first alarm is finished, but still within the pulse extension
period the unit will treat this as a single trigger and not create a new
event.
VMD protect pre-
alarm time
This is the time period prior to the VMD trigger where the images will be
saved along with the VMD recording, these images will be available for
archive and will be protected from being overwritten.
VMD protect alarm
duration
This is the minimum time period in seconds from the start of the VMD
trigger that will be protected from being overwritten. This time will include
the VMD recording, the pulse extension and any post alarm recording
but will not include the pre-alarm images.
VMD protect period Any VMD entry in the database can be protected from being overwritten,
this is the period of time the files will be saved and protected. After this
time the files will be automatically overwritten unless specified.
Protect VMD
images indefinitely
It is possible to protect VMD images indefinitely to ensure any incidents
are saved and protected for review at a later date. These files will
remain protected until specified differently.
Live & DuoView
Display
It is possible to utilise the web interface to monitor live and recorded
video, if the Live or DuoView are to be used it is possible to identify
when VMD has been triggered, squares will appear over the area where
there is movement.