Setup guide

Dedicated Micros Page 33
How to Enable Audio Recording
The Digital Sprite 2 supports two audio inputs which can allow for external
audio equipment to be connected to the Digital Sprite 2. This allows the
Operator to communicate via the Viewer software across the network to the
camera location.
The audio is independent of the video inputs which means any camera can have associated
audio equipment, e.g. Intercom system. The audio can also be recorded along side the video to
allow review of both simultaneously.
To configure and enable the audio to be recorded:
1. Select System -> Audio Recording.
2. Enter the title for the Audio Channel 1.
3. Tick the box adjacent to the Channel 1 option to enable audio recording. This is the audio
coming in to the server.
4. Enter the title of the Audio Channel 2.
5. Tick the box adjacent to the Channel 2 option to enable audio recording of the output audio,
i.e. the audio being transmitted from the Operator application.
6. Make sure you save the information by selecting Save Settings!
7. Reset the unit for the settings to be actioned.
Function Description
RAMdisk available This identifies the overall size of the RAMDisk that is available on the
unit, again this is a read only sections.
RAMDISK (A) This area is user definable and allows a portion of the RAMDisk to be
allocated for alarm recording, the range is between 16KB and 2048KB.