Setup guide

Dedicated Micros Page 23

Telemetry Setup Page

1. To access the set up parameters of the camera select the Telemetry Setup button on the

Camera Set-up page.

2. The telemetry control buttons for configuration will be displayed along with camera selection,

display options and resolution selection.

Function Description

Telemetry Setup If any of the inputs have been set coaxial telemetry this option will be

active and will allow the telemetry functions to be configured (see below

for more detailed information).

Connected If the camera input has a video source connected then the input must be

enabled.

Camera Title It is possible to allocate a camera title to each of the enabled inputs, this

along with the camera number will be displayed on the screen to identify

the camera selected.

Recording Day /

Night / Weekend

Each camera can be individually enabled to be available for recording

when the unit is in the Day, night or weekend operation mode.

Viewable Cameras can be selected or deselected from being available to be

viewed, e.g. covert cameras. This setting does not affect the recorded

video it is for viewing only.

Terminated As the Digital Sprite 2 supports loop through by default all inputs are

terminated at 75 ohms. If any of the inputs are looped the termination

must be removed, un-tick the corresponding termination box.

Mono If the video input on the Digital Sprite 2 is a black and white

(monochrome) source then tick the corresponding camera. The Digital

Sprite 2 will try and compress the colour contents of the image if this box

is not enabled, ticking this box will remove unnecessary overhead on the

compression process.

Telemetry The Digital Sprite 2 supports numerous protocols for telemetry cameras,

this allows the corresponding video input to be configured for the

relevant protocol (see below for more information)

Note: When you select the Telemetry Setup button, it may take a few seconds for

the page and video to be downloaded, during this time do not press any buttons as

this will slow the process down.