Setup guide

Page 20 Dedicated Micros
Function Description
IP Address, Subnet
Mask, Default
Gateway
These are the settings that have already been configured via the Serial
port or OSD menus. This is the static IP address and subnet mask, and
if applicable default gateway.
Primary DNS This is the primary DNS server IP address for applications that are
utilising domain names.
Secondary DNS This is the IP address of the secondary DNS server in case of failure of
the primary server.
Unit Name This is the name that is allocated to the Digital Sprite 2, this will be used
when transmitting alarm information to a Remote Monitoring Station.
PPP IP This is the IP address that will be allocated if the unit is to dial (in and
out) on alarm using PPP. This is independent to the units IP address.
DHCP IP If the Digital Sprite is to be installed in a DHCP network, this option
would display the IP address that was automatically allocated to the unit
from the DHCP Server.
DHCP Subnet If the Digital Sprite is to be installed in a DHCP network, this option
would display the subnet that was automatically allocated to the unit
from the DHCP Server.