Setup guide

Page 144 Dedicated Micros
Firewall options
Ping response Enabled
Enabled, Disabled
IP entry 01 address 000.000.000.000
Open TCP ports 01
01-32
Allowed IP address 01
01-32
IP entry 01 subnet 255.255.255.255
TCP entry 01 from Port 0000
0000 - 9999
TCP entry 01 to Port 0000
0000 - 9999
Open UDP Ports 01
01-32
UDP entry 01 from Port 0000
0000 - 9999
UDP entry 01 to Port 0000
0000 - 9999
Function Description
Ping Response By default this option is enabled and therefore allows the Digital
Sprite 2 to be pinged on the network. Disabling this option will make
the Digital Sprite 2 less visible on the network.
Allowed IP address It is possible to have 32 individual entries in the allowed IP address
database, use the or keys to select the entry number.
IP Entry XX Address
and Subnet
These are the IP addresses and Subnet mask that the Digital Sprite
2 will allow connections from, i.e. the IP address of the host PC’s
that will connect to the Digital Sprite 2 to; review video, download
information.
Important Note: It is very important to take this feature into account when the Digital
Sprite 2 is installed in a DHCP network environment where IP addresses are
allocated automatically and can change on reset.
Note: If you enable this function ensure the IP address of the PC you are using to
configure the system is also in the list. If the address is not added then you will be
unable to communicate with the Digital Sprite 2 via the network.