Setup guide

Page 142 Dedicated Micros
Upload Settings
This is a submenu of Web Cam Settings.
Function Description
Webcam Enabled This gives access to a sub menu for when the webcam is enabled.
Select Cameras Cameras can be individually selected to be part of the webcam
functionality. Press the corresponding camera key to enable /
disable the camera.
If all cameras are to be included in the function, select the All
Cameras option.
Upload Settings
FTP root drive / directory
FTP Server
<None>
<None>
FTP image directory
Username
<None>
<None>
Image filename prefix
Password
Update intervals
<None>
Edit
010 secs
15 characters
15 characters
15 characters
15 characters
15 characters
000 - 999 seconds
Function Description
FTP Server
This identifies the IP address (or name) of the FTP server that will
receive the images from the Digital Sprite 2.
FTP Root Drive /
Directory
Identify the directory where the downloaded images are to be
stored, this settings can accommodate 15 characters.
FTP Image Directory This directory will be created when the initial image is uploaded to
the FTP Server, it is the directory where all images will be saved on
the server.
Enter the name of the directory to be created, it is recommended
that a name associated with the Digital Sprite 2 for ease or retrieval.
Note: It is recommended that a name associated with the unit name be used for ease
of retrieval.