Setup guide

Dedicated Micros Page 141
Note: Take into account the speed and type of network connection being used when
selecting the resolution.
Webcam Settings
Batch transfer
Upload settings
Disabled
Edit
Single FTP session
Webcam enabled
Disabled
Edit
Webcam Resolution
Select cameras
High res
Selected Cameras
Disabled, Enabled
Disabled, Enabled
High re, Medium res, Low res
All cameras
Function Description
Upload Settings As the images are transmitted via FTP, this option allows the FTP
Server information to be configured.
Batch Transfer Enable batch transfer and images will be transmitted to the FTP
Server in a ‘batch’, e.g. the Digital Sprite 2 will take ‘snap shots’ from
video inputs 1, 2, 4 and send these in a single batch to the FTP
Server.
If this is disabled then the Digital Sprite 2 will transmit files
individually. The delay between batch files being transmitted is the
update interval, e.g. every 10 seconds the Digital Sprite 2 will send
images from video inputs 1, 2, 3.
If batch is enabled then the update interval is the time between the
Digital Sprite 2 sampling an image from one input to the next, e.g.
the Digital Sprite 2 will transmit an image from input 1, 10 seconds
later it will transmit and image from input 2, etc.
Single FTP Session
Enabling Single FTP Session will result in avoiding the need to carry
out the login/logout process for each image that is transmitted to the
FTP Server, the Digital Sprite 2 will remain connected and logged in
to the ISP until the connection is manually disabled.
Webcam Resolution Identify the resolution of the images, defined in the Camera Setup
menu, that are to be transferred to the FTP Server.