Setup guide

Dedicated Micros Page 137

SMS Settings

The Digital Sprite 2 can be configured to send SMS messages under specific circumstances;

alarm, system startup, etc.

This menu allows the SMS settings to be configured to allow the messages to be transferred to

the SMS Server.

Function Description

Report startup If for any reason the Digital Sprite 2 has reset an e-mail will be

transmitted to identify system startup.

Report alarms When an alarm is triggered on any of the alarm inputs an e-mail can

be transmitted to identify the input and any associated information.

Report camera fail The video signals on the Digital Sprite 2 must be 1 Volt pk-to-pk, if

any of the signals drop below this level and e-mail will be

transmitted identifying the video input.

Report VMD activation If VMD is enabled on the Digital Sprite 2 any identification of

movement will cause the unit to send an e-mail containing

information on the video input number.

SMS Settings

Destination number <None>

15 characters (Name or IP address)

SMS Server

Callback profile 1

Disabled

ETHER/

Callback profile 0

Advanced settings

ETHER

Edit

Destination URL <None>

15 characters

Disabled, Enabled

ETHER, 15 characters

Report Settings

SMS command password

Edit