Setup guide

Page 136 Dedicated Micros
Report Settings
This is a submenu of Email Settings
Function Description
Recipient Address and
Display Name
Enter the e-mail address of the recipient that the SMTP Server is to
forward the e-mail on to.
The Display Name is the name that will be shown, it is
recommended that an name associated with the Digital Sprite 2 is
used for ease of identification.
Reply-to-Address and
Display Name
These fields must be configured if the recipient is to reply to an e-
mail.
The reply will be to a valid e-mail address to inform an Operator that
an incident has occurred.
Enter the e-mail address to allow a reply to be received.
Sender Address and
Display Name
These optional fields indicate the source of the e-mail notification.
If the fields are left blank the Digital Sprite 2 will use the system
name & DNS name to create a sender name.
Report Settings This identifies the system conditions under which the Digital Sprite 2
will automatically transmit and e-mail.
E-mail Logging When enabled an entry will be generated in the system log to
identify when and why each e-mail transaction was transmitted from
the Digital Sprite 2.
Note: The Digital Sprite 2 does not accept incoming e-mails.
Report Settings
Report startup Disabled
Disabled, Enabled
Report camera fail Disabled
Report alarms Disabled
Disabled, Enabled
Disabled, Enabled
Disabled, Enabled
Report VMD activation Disabled