Setup guide

Dedicated Micros Page 135

Email Settings

If the Digital Sprite 2 has been configured to transmit e-mails on alarm, camera fail, etc it is

necessary to configure the e-mail settings.

Email Settings

Connection profile <None>

Mail server <None>

Recipient display name <None>

Recipient address

Reply-to address

<None>

Reply-to display name <None>

Sender address <None>

Sender display name <None>

Report settings

Email logging

Edit

Enabled

15 characters

Enabled, Disabled

Function Description

Connection Profile It is possible for the e-mail to be transmitted via the Ethernet

network or dial up connection. Use the or to scroll through the

available characters to identify the route the e-mail will take.

Mail Server This is the IP address or DNS name of the SMTP Server that the e-

mail from the Digital Sprite 2 will be sent to.

The SMTP server will then forward this onto the allocated recipient.

Note: It is necessary to have either a modem connected and configured (dial up) or

the Digital Sprite 2 connected to a LAN or WAN and has been allocated a valid IP

address.