Setup guide

Page 132 Dedicated Micros
This section details the option to configure Network options via the Digital Sprite 2 On Screen
Display (OSD) menus.
The menu structure along with a detailed explanation will be shown.
Remote Reporting
The Digital Sprite 2 supports remote alarm monitoring and can configured to automatically carry
out actions to notify the remote station of events. This menu configures the remote reporting
details for these features.
Appendix G - Advanced Configuration via OSD
Remote Reporting
Primary host <None>
Primary profile Define
<None>
Secondary profile Define
<None>
Secondary host <None>
Unit alarm name <None>
Public (NAT) IP address <None>
Video Server Port 0000
Report Settings
Dial retry time/limit
Alm telnet server port
Edit
01 mins/00
00023
15 characters
15 characters
Ethernet, 10 characters
Ethernet, 10 characters
15 characters
00/00 - 99/99
0000 - 9999
Function Description
Primary Host This is the IP address or name of the initial host that the Digital
Sprite 2 will transmit an alarm message to.
The option allows 15 characters to be entered, if DNS is enabled
enter the DNS name of the primary server or enter the IP address.
Primary Profiles This is the medium that the Digital Sprite 2 will use to make the
connection to the primary host.
The option allows you to define (10 characters) the medium or select
Ethernet.