Setup guide

Dedicated Micros Page 129
SMS Reports
These are messages sent from the Digital Sprite 2 to a pre-defined SMS Server when an event
occurs. The ‘events’ that will initiate this function are configured within the Digital Sprite 2
configuration web pages.
Startup
An SMS message will be sent from the Digital Sprite 2 to the receiving station when the Digital
Sprite 2 ‘starts up’.
STARTUP?<name>&<time>&<IP address>&<latitude>&<longitude>&<zone>
Alarm
This report is generated when an alarm is received on the Digital Sprite 2.
ALARM?<name>&<time>&<lat>&<long>&<speed>&<course>&<zone>&<camera>&<title>
name This is the system name configured on the Digital Sprite 2.
time This is the local julian time of the message. The julian time is the
number of seconds since 00:00:01 hour on January 1st 1970. If the
Verbose message option has been enabled on the Digital Sprite 2 this
message will be in a human readable format.
IP address This is the Ethernet IP address of the Digital Sprite 2.
latitude This parameter is not relevant to the Digital Sprite 2 and included to
support other Dedicated Micros platforms.
longitude This parameter is not relevant to the Digital Sprite 2 and included to
support other Dedicated Micros platforms.
zone This parameter is not relevant to the Digital Sprite 2 and included to
support other Dedicated Micros platforms.
name This is the system name configured on the Digital Sprite 2.
time This is the local julian time of the message. The julian time is the
number of seconds since 00:00:01 hour on January 1st 1970. If the
Verbose message option has been enabled on the Digital Sprite 2 this
message will be in a human readable format.
lat This parameter is not relevant to the Digital Sprite 2 and included to
support other Dedicated Micros platforms.