Setup guide

Dedicated Micros Page 111
Editing .ini Files using Backup Utility
The configuration of the files stored on the Digital Sprite 2 has detailed the configuration and
editing process using an FTP Client application. If you do not have an FTP Client application the
following describes how the Backup Utility can be used to download, edit and upload these files.
1. Launch the DM Backup utility that was installed with the Viewer application, select Start->
Programs and find the folder where the software was installed (e.g. Start -> DVIP Viewer).
2. You need to add the site (Digital Sprite 2) to the site list, select Edit Sites highlight Sites
option in the tree display and right mouse click and select New Site Folder.
3. Enter the unit name, which will become the folder name and select OK.
4. Select the new folder in the folder site tree, the Connections Option page will be displayed.
Enter the name, IP address, Site ID of the Digital Sprite 2. The Site ID must be the same as the
Name of the Digital Sprite 2. If used with alarms the name and SITE ID must match the name in
the alarm connection page.
5. Select Save, this will save all the configuration information.
6. Select the FTP/Backup tab, enter the username and password for FTP (default is dm=ftp).
Save the settings.