Setup guide

Page 104 Dedicated Micros
8. There are two ways of opening and editing these files, depending on the file that is selected.
hosts and profiles
Highlight the file, click the right mouse key and select View.
The file will be opened and you can edit the information.
modems.ini, USER.ini, Vidcfg.ini, WEBUSER.ini
Highlight the file, click the right mouse key and select Edit.
The file will be opened and you can edit the information.
9. Once you have completed the configuration Save the file.
10. When you close the file you will be prompted to upload the file to the Digital Sprite 2, select
Upload.
Structure of the Files
Each of the following files usually has an explanation at the beginning of the file describing what
the feature command set is and how they can be edit.
If any of the configuration commands have a comment (#) at the beginning of the line then this
has been disabled, remove the comment (#) enables the feature and allows you to configure the
settings.
Headings will be included when more that one feature can be configured within the file to identify
the command string within that section, e.g. [unlock], [watermarking].
Note: If you are not prompted ensure you upload the file to the Digital Sprite 2 for the
configuration to take affect.