Setup guide

Page 98 Dedicated Micros
Sent Message Log
This logs all the SMS message information. There are various options that can
be configured to allow an SMS message to be sent; start up, alarms, etc.
The Sent Message Log, logs the information on the message sent including;
the time and date, sender and receiver details and the message that was sent.
The following shows a typical SMS message log for when the system starts up after power down
or reset.
Fri Mar 12 12:05:26 2004 +0000
SMS to: 07970972823
SMS message: STARTUP, TVDEMO, Fri Mar 12 11:15:06 2004 +0000, 0.0.0.0
SMS response: STARTUP, TVDEMO, FRI MAR 12 11:15:06 2004 +0000, 0.0.0.0
FTP Download Log
The Digital Sprite 2 can be configured to manual or automatically trigger and
FTP download of images. These downloads are logged and stored with the FTP
Download Log for future analysis.
Logfile
The Logfile stores all information on every action that is carried out by the
Digital Sprite 2; when alarms are received and actioned, resets, failed outward
bound alarm connections, etc.
This is the current file and will continue to store data until it reaches its
maximum size limit (typically 1Mb). This file then writes over the top of the
Logfile Backup and becomes the backup file and a new logfile is created.
This ensures current and recent information is always available.
The information detailed is; Time and date, Reset Code and Reason, Connection-status, Site
and ARC ID.