Operating Instructions and Installation Instructions

CamVu 2000

DRAFT

Rear Connections

The CamVu 2000 features push t connectors which house connections for 12VDC power and the relay

output. There are also connections for an audio input (via 3.5mm stereo jack socket) and an RJ45 socket for

connection to a suitable network point and POE. Serial communications with camera is via the D type plug.

This can be congured for RS232, RS485 or RS422 protocols. The BNC connection is used in conjunction

with a local monitor to focus the camera during installation.

• Serial port via D-Type for RS232 (3 wire), RS485 (2 wire) and RS422 (4 wire)

• Audio input and output via 3.5mm stereo jack

• BNC output congurable for PAL or NTSC - active for 10 minutes after assist setting up the lens

and nding the unit’s IP address.

• Two way push t connector for 12VDC

• LEDs for power and network access

• RJ45 network port (with POE option)

• 2 x EOL alarm inputs

• 500mA light duty relay output

• SD media slot with LED