Operating Instructions and Installation Instructions

CamVu 2000

DRAFT

Remote Reporting

This menu details the conguration requirements for the unit to report to a Remote Video Receiving Centre

(RVRC) following alarm activation.

Note: This menu will only be displayed if ‘Remote Reporting’ is selected in the

System Settings->Features menu.

Primary hostname This is the IP address or URL of the initial host that the unit will

transmit an alarm message to.

Primary dial prole It is possible for the alarm message to be transmitted via the Ethernet

network or a dial up connection.

Secondary hostname If the unit is unable to contact the primary host, an alternative route

can be identied via a secondary host. If there is only one alarm

receiving IP address, you must enter the details in both the primary

and secondary connection settings.

Secondary dial prole It is possible to select a separate dial prole for the

secondary host.

Public (NAT) address This is the public IP (or domain name) for a unit connected to the

Internet via a NAT Router or Firewall. This eld should be left blank if

NAT is not used e.g. a private network.