Operating Instructions and Installation Instructions
Dedicated Micros ©2010
75
CamVu 2000
DRAFT
E Mail
The unit can automatically transmit an e-mail to an SMTP Server under numerous conditions i.e. on start
up, on receipt of an alarm, camera failure etc. This allows the unit to be installed in unmanned applications
where a Remote Video Response Centre (or Manager etc.) would be notied by e-mail if any of these
conditions occur.
Connection Prole It is possible for the e-mail to be transmitted via the Ethernet network.
This setting presumes that the unit is connected to a LAN or WAN
and allocated a valid IP address.
Mail Server Address This is the IP address or URL of the SMTP Server that the e-mail will
be sent to. The SMTP server will then forward this to the intended
recipient.
Username Enter the login details for the SMTP server.
Password Enter the login details for the SMTP server.
Recipient Email This is the e-mail address of the intended recipient.
Recipient Display Name This is the addressee name that will be shown in the email name eld.
Reply to Email This eld must be congured if the recipient is to reply to an e-mail.
The unit does not accept incoming e-mails therefore ensure this is a
valid e-mail address.
Reply To Display Name This is the ‘reply to’ name that will be shown in the email
name eld.