Operating Instructions and Installation Instructions

CamVu 2000

DRAFT

Max Transmission Rate kbits/sec This shows the maximum transmission speed for the network type

being used. If set to ‘0’, transmission speed is not limited in the

camera.

Note: This setting will limit and override any higher transmission rate entered in the Video

Transmission menu (Conguration menu->Live Trans).

Force 10BaseT operation The unit supports 10 or 100BaseT half duplex transmission. Selecting

this option will force the unit to operate at a 10BaseT connection.

Tx Image Buffers This is used in order to improve the picture delivery over Ethernet

when using a slow connection i.e. 256Kbps. A buffer setting of 1,2 or

3 is available (default setting is 1).

Ethernet MTU Bytes This is the maximum transmit unit for the Ethernet packet. The MTU

is the largest physical packet size measured in bytes that the network

can transmit. By default this gure is set to 1500bytes.

Max Transmission Timeout ms This is the time (in milliseconds) the unit will wait to re-send a packet

if an acknowledgement is not received.

Reset Resets the unit to apply changes.

Rem Report Opens the Network Settings->Remote Reporting page.

Webcam Opens the Network Settings->Web Camera Conguration page.

Email Opens the Network Settings->Email page.

Refresh (Purple) Refreshes the current page.