Operating Instructions and Installation Instructions

CamVu 2000

DRAFT

Activity Setup

The unit supports Activity Detection on all video inputs. It enables the camera to automatically detect any

movement/changes within the video scene; this can trigger a number of operations such as FTP alarm

notication and an increase in recording rate.

A still image of the selected camera will be shown in the Grid Editor screen. To establish an Activity zone,

edit the cells displayed across the image.

This option should be used in conjunction with the Zone Inputs and Zone Actions menus.

If the camera is congured to detect VMD, the following warning will be displayed. Use the Alarm Settings->

VMD/ACT Response menu option to congure ‘Detection type’ for Activity.

Once Activity is congured, this page will be displayed