Operating Instructions and Installation Instructions
Dedicated Micros ©2010
62
CamVu 2000
DRAFT
Prole Change Select to enable the unit to switch from Normal to Event recording
following alarm activation.
Alarm Reporting This must be enabled for the unit to automatically connect
on alarm.
Alarm 24Hr This will ensure that Activity Detection is permanently enabled on this
camera channel.
Add Still Image This will record a still image of the trigger along with the standard
recording. This can then be sent on to an external destination.
Protect Alarm Images Select to automatically protect alarm images from
being overwritten.
Alarm Relay This will trigger the unit’s on-board relay following VMD/Activity
activation.
E-Mail Image This will email a still image (in JPEG format) of the VMD/Activity
trigger to the email recipient as congured in the ‘E-mail’ menu
(Network Settings->E-mail)
Enable in UNSET This will enable Activity Detection when the unit is in Day (Unset)
operation mode.
Enable in SET This will enable Activity Detection when the unit is in Night (Set)
operation mode.
Enable in OVERRIDE This will enable Activity Detection when the unit is in Weekend
(Override) operation mode.
Note: Unset, Set and Override modes may be renamed via Record Settings->Schedule.
Refresh (Purple) Refreshes the current page.