Operating Instructions and Installation Instructions
Dedicated Micros ©2010
57
CamVu 2000
DRAFT
Zone Actions
This menu allows actions to be allocated to individual alarm zones. This page should be congured in
conjunction with the Zone Inputs menu.
Zone Select a zone (alarm) to congure.
Primary Camera This allows the camera to be assigned as the primary camera
associated with the Alarm Zone. The camera image will be displayed
when an alarm in this zone is triggered.
Alarm Colour This displays the local alarm text in the selected colour and can be
useful in prioritising alarms. Options available are Red, Green, Blue,
Yellow, Cyan and Magenta.
Create Database Entry Entry An alarm activation will be added to the database. The zone title
will be used as part of the entry information.
Prole Change Select to enable the unit to switch from Normal to Event recording
following alarm zone activation.
Archive Alarm images can automatically be protected from being overwritten.
Alarm Reporting This must be enabled to allow the unit to send an alarm notication to
an external destination i.e an RVRC reporting via NetVu ObserVer.
Email Image If this option is selected, a JPEG will be added to the reporting email
(if Email Reporting is selected).
Add Still Image This will record a still image of the trigger along with the standard
recording. This can then be sent on to an external destination.