Operating Instructions and Installation Instructions
Dedicated Micros ©2010
41
CamVu 2000
DRAFT
ICR Settings
The ICR Settings menus allow conguration of the unit’s record functions. Record settings can be congured
for normal operation, on alarm, by schedule and for set holiday and weekend periods. Selected video data
can be saved and protected. Refer to the individual menus for further details.
The Default page allows the basic Recording settings to be edited.
The Prole Record page allows the recording conguration to be based on specic priorities. The record
rate and quality can be customised to respond appropriately to the alarms and time of day. A high degree of
control and exibility is possible using these options.
The Schedule page is used to congure the Timer Function, this enables the unit to automatically be put into
set/unset mode at specic times on specic days.
The RVRC page is used to allow a user to temporarily force the System in to the congured set/unset/
override mode. The user will be required to enter their name and all activity will be logged.
The Protect Video page allows previously recorded data to be protected and retained. If needed, allrecording
can be halted and saved video deleted.
The AoE Setup page allows conguration of the units ATA over Ethernet (AoE) function. AoE is a network
protocol designed for simple high-performance access of storage devices over Ethernet networks
Importantly the external storage device must be located on the same network as the unit.