Operating Instructions and Installation Instructions
Dedicated Micros ©2010
40
CamVu 2000
DRAFT
Camera Setup
This menu allows the conguration of local camera settings for the unit.
Camera Title This title can be edited to allocate a name to the unit. This is
displayed when the unit is accessed via NetVu ObserVer and
is set when transmitting information to a Remote Video
Response Centre (RVRC)
Exposure Time Set the camera target exposure rate (select from 1/1 to 1/100
seconds). A slower exposure rate will make the camera more
sensitive, however fast movement in the image may appear blurred.
Brightness Controls the electronic gate of the camera to make the image brighter
or darker.
Flip Video Used to invert the image when the camera is mounted upside down.
Mirror Video Select to ‘mirror’ the camera image (horizontal ip).
Collection Resolution This sets the maximum image resolution that is collected by the
camera. If full 1600x1200 resolution (UXGA) is not required, reducing
the collection resolution can increase the capture rate of the camera.
By default collection resolution is set to
Refresh (Purple) Refreshes the current page