Operating Instructions and Installation Instructions
Dedicated Micros ©2010
35
CamVu 2000
DRAFT
Viewer Defaults
The units Viewer function allows remote users to simulate local operation over a network. This menu
allows conguration of settings for the Viewer function, refer to ‘Operating The Viewer’ for more information
regarding the Viewer.
Default Image Format Images from cameras can be displayed in either JPEG or
MPEG format.
Default Image Req Images displayed full screen in the Viewer menus can be shown in
either High Medium or Low resolution.
Applet Location The location of the unit’s Viewer menu applet is displayed. The default
location will always be the applet installed on the unit. If accessing
multiple units via a remote connection, all can be assigned the same
Viewer applet. This will lessen the load time required when accessing
different DVRs/Servers.
For example, if a local unit and a remote DVR are to be accessed, it
is possible to set the Applet location for both DVRs as the local unit.
If viewing the unit remotely, Dedicated Micros provide a remote applet
located on the Dedicated Micros website (www.dedicatedmicros.
com/software_release/windows/viewer-applet.jar). Due to possible
bandwith restrictions on the network the DVR is located, using this
remote applet may improve data transfer speeds.