Operating Instructions and Installation Instructions
Dedicated Micros ©2010
3
CamVu 2000
DRAFT
Introduction
1.03
Offering up to six times the denition of analogue cameras, the Dedicated Micros CamVu 2000 Camera is
ideal for situations where high resolution, high quality images are required. The camera’s high denition
technology is based on Dedicated Micros award winning NetVu Connected architecture, allowing seamless
operation and deep integration with a wide range of DVRs and other devices, as well as simplied
integration into large-scale systems
MULTIPLE, SIMULTANEOUS VIDEO STREAMS
Dedicated Micros’ unique Visual Signal Processor (ViSP) allows the CamVu Day/Night dome to transmit
multiple simultaneous MPEG-4 and/ or JPEG images to any number of associated NetVu Connected
devices for image viewing. Each stream can be tailored to suit the viewer’s bandwidth requirements. As
well as steaming, the camera can simultaneously record images to an on-board microSD card or to network
attached storage using ATA over Ethernet.
CLOSED IPTV
The CamVu2000 works seamlessly within Dedicated Micros award winning Closed IPTV solution. Closed
IPTV makes deploying an IP Video system safe, secure and simple. By combining patent-pending innovation
with zeroconf networking technology Closed IPTV removes the need to allocate IP addresses to IP cameras.
Closed IPTV is completely deterministic, automatically discovering and assigning IP cameras to network
ports as required. This ground breaking solution provides a secure answer to video over IP networks -
requiring no prior knowledge of IP network congurations.
ANALYTICS CAPABLE
As part of our growing range of AnalyticsCapable products, the CamVu Day/Night dome is able to contain
the latest analytics solutions from Dedicated Micros including Object Left/Removed Detection Tripwire and
Counting Tripwire, all locally hosted on the camera.
Features
• Sensor Resolution 1600 x 1200
• Chipwrights 5631 ViSP (Visual Signal Processor)
• UXGA max resolution
• Max frame rate at UXGA res 15fps
• Programmable camera settings
• CS mount lens (C mount capable with adapter)
• Extruded aluminium housing
• Accessory mounting ¼” 20 UNC or ¼” BSW (bottom)
• PoE to IEEE802.3af
• Two way push t connector for 12VDC
• RJ45 network port
• Audio input and output via 3.5mm stereo jack
• Built in web server for conguration
• JPEG and MPEG-4 delivered simultaneously for live viewing and recording
• Serial port via D-Type for RS232 (3 wire), RS485 (2 wire) and RS422 (4 wire)
• BNC output congurable for PAL / NTSC for camera setup