Operating Instructions and Installation Instructions

Dedicated Micros ©2010
26
CamVu 2000
DRAFT
Serial Ports
This menu allows conguration of the unit’s Serial port.
Serial Port These is one serial port available on the unit.
Port Cong The serial port can be congured for specic uses.
Select from:
None Switches port off
Debug Sets port for serial communications
PPP Sets port for Point to Point Protocol
Telem Sets port for Telemetry purposes
Comm Sets port for Comms purposes
EPOS Sets the serial port for connection to an
EPOS (Electronic Point Of Sale) device
Interface Type Choose the type of serial interface being used. Select from RS232,
RS485 or RS422.
Baud/Parity/Data/Stop/Flow Control These options allow the Serial port communication settings to
be congured.
Note: These settings will default to pre-determined values and should not normally be altered.
Reset(Red) Resets the unit
Maintain (Green) Opens the System Settings->Maintain page
Refresh (Purple) Refreshes the current page