Operating Instructions and Installation Instructions

CamVu 2000

DRAFT

Time and Date

System Time The current system time and date is displayed.

Current Time Zone Displays the currently selected time zone settings.

Time Zone Select the relevant timezone offset from the accompanying drop

down menu.

Date Format As default, the date is entered dd/mm/yy. It can also be displayed as

mm/dd/yy or yy/mm/dd.

Reset(Red) Resets the unit

Time Format As default, the time displayed is in 12 hour format. This can be

changed to 24 hour if required.

SNTP Server A Simple Network Time Protocol (SNTP) server allows external

devices to connect and set their current date and time settings to that

of the SNTP. If required, enter the SNTP server IP address here.

Set Time Allows current unit time to be updated.

Set Time (Green) Applies the new time.

Set Date Allows current unit date to be updated.

PC Time Displays the system time of the PC currently being used to view

the webpages.

Sync Time (Blue) Use this button to synchronise the time of the unit to that of the PC

being used to view the webpages.