Operating Instructions and Installation Instructions

CamVu Mini Dome

Create Database Entry When selected, an alarm entry will be added to the

Event database.

Prole Change Select to enable the unit to switch from Normal to Event recording

following alarm activation.

Alarm Reporting This must be enabled for the unit to automatically connect

on alarm.

Alarm 24Hr This will ensure that Activity Detection is permanently enabled on this

camera channel.

Add Still Image This will record a still image of the trigger along with the standard

recording. This can then be sent on to an external destination.

Protect Alarm Images Select to automatically protect alarm images from

being overwritten.

Alarm Relay This will trigger the unit’s on-board relay following VMD/Activity

activation.

E-Mail Image This will email a still image (in JPEG format) of the VMD/Activity

trigger to the email recipient as congured in the ‘E-mail’ menu

(Network Settings->E-mail)

Enable in UNSET This will enable Activity Detection when the unit is in Day (Unset)

operation mode.

Enable in SET This will enable Activity Detection when the unit is in Night (Set)

operation mode.

Enable in OVERRIDE This will enable Activity Detection when the unit is in Weekend

(Override) operation mode.

Note: Unset, Set and Override modes may be renamed via Record Settings->Schedule.

Refresh (Purple) Refreshes the current page.