Operating Instructions and Installation Instructions

Dedicated Micros ©2010
58
CamVu Mini Dome
Alarm
The Alarm Settings menus allow conguration of the unit’s alarm functionality. Individual alarm inputs and
alarm zones can be congured. Global relays can be activated and the Activity grid set up. Refer to the
individual menus for further details.
The Alarm Input page allows conguration of alarm channels. Two alarm channels are available.
The Zone Input page enables the conguration of alarm zones. Up to 32 separate alarm zones can
be created.
The Zone Actions page enables actions such as Go to Preset to be allocated to alarm zones. Zones can
also be associated with a specic camera. On receipt of an alarm, images from the associated (primary)
camera will automatically be displayed in the Viewer menu.
The Masked Cam(era) Det(ection) page allows camera masking to be congured. The Camera can detect
when the lens has been obscured, i.e. by being covered or painted over. This page will enabled detection
and set the threshold for activation.
The VMD/Act Response page enables conguration of responses following an Activity
Detection trigger.
The Activity Setup page allowed activation and conguration of the Activity feature on all video inputs. The
Activity feature enables the camera to automatically detect any movement/changes within the video scene.
This can trigger a number of operations such as FTP alarm notication or an increase in the recording rate.
The VMD Conguration page enables the unit’s VMD (Video Motion Detection) to be set-up. VMD allows a
camera to automatically detect if there is any movement/changes within specic areas of the video scene.
The Global Actions page allows the onboard relay to be congured.