Operating Instructions and Installation Instructions

Dedicated Micros ©2010
4
CamVu Mini Dome
Dynamic Range 95dB typical, 120dB maximum
Sensitivity 1lux F1.6 40 IRE
Signal to noise better than 50dB
Sensor Resolution 480TVL
Lens 3.8 - 9.5mm Varifocal F1.2
D/N Version
1/3” SuperHAD™ CCD Imager
DSP imager
752 (H) x 582 (V) Resolution
AWB 2500K ~ 9500K
AGC - On/Off, max <28dB
On/Off, centre weighted backlight compensation
Dynamic Range 95dB typical, 120dB maximum
Dynamic Range 50dB
Sensitivity 1.0 / 0.15 lux at F1.6 40 IRE
Sensor Resolution 540TVL
Lens 3.6 - 9mm Varifocal F1.6
Benets
The latest HyperD technology provides low light performance superb image quality and colour
delity in variable and high contrast lighting conditions.
Operates seamlessly within a NetVu Connected network.
Remote conguration removes the need for multiple revisits
Images can be viewed over low bandwidth networks using MPEG-4 but captured in JPEG
Analogue Video Connector allows local lens adjustment
DPS is a trademark of Pixim Inc SuperHAD is a trademark of Sony
* under development
CE NOTICE (EUROPEAN UNION)
This section contains the regulatory declarations for the EU for the CamVu Mini Dome Camera.
This product is marked with the CE symbol and indicates compliance with all applicable Directives. A
“Declaration of Conformity” is held at Dedicated Micros LTD, 1200 Daresbury Park, Daresbury, Cheshire
WA4 4HS WWW.dedicatedmicros.com
Hereby, Dedicated Micros LTD, declares that this CamVu Mini Dome Camera is in compliance with the
essential requirements and other relevant provisions of Directive 95/5/EC.
Marking by the symbol CE indicates compliance of this Dedicated Micros product to the Electromagnetic
Compatibility Directive 89/336/EEC, and the Low Voltage Directive 73/23/EEC of the European Union. Such
marking is indicative that this system meets the following technical standards
EN 61000-6-3 EMC Standard Residential, Commercial and Light Industry.
EN 62000-3-3 Limitations of voltage changes, uctuations and icker in public low-voltage
supply systems for equipment with rated current up to 16A.