Operating Instructions and Installation Instructions

CamVu Mini Dome

Switch Settings DN Versions Only

To assist with the set up process, live video can be seen using the dome’s viewer web pages. Alternatively

an analogue service monitor can be attached to the dome using a service lead.

Note: The analogue output is only active for 10 minutes after power up.

The DIP switches are located on the camera’s circuit board.

LLTNI NO FFO noitcnuF hctiwS

1 Backlight Compensation

2 Automatic Gain Control

3 Electronic Iris

kcoL eniL 4

OL IH NO FFO noitcnuF hctiwS

thgiN/yaD 1

2 Colour Burst

Default setting

White indicates switch position

Backlight Compensation

The Backlight Compensation (BLC) feature compensates for back-lit scenes by enhancing objects in the

centre of the scene which would previously have been in silhouette. Select ON or OFF using the BLC switch.

Default is OFF.

AGC (Automatic Gain Control)

The Automatic Gain Control (AGC) feature can improve picture quality when levels of illumination are low.

Select ON or OFF using the AGC switch. For most applications the AGC feature should be ON and is

therefore the default setting.

Electronic Iris

The Electronic Iris (EI) feature compensates for excessive light levels by automatically adjusting the shutter

speed. For auto-iris lenses, the EI should be set to OFF. For manual lenses, EI should be ON.