Operating Instructions and Installation Instructions
Dedicated Micros ©2010
119
CamVu Mini Dome
Using NetVu Observer
The CamVu Mini Dome Camera produces a digital video stream from an independent IP address. NetVu
ObserVer can connect directly to this video stream in the same way as it connects to a DVR. However, the
camera needs to be within the same subnet as ObserVer.
A CamVu Mini Dome Camera can be added to ObserVer to allow the Operator to easily select the camera
for viewing and control:
1. Highlight the Stored Image Servers Folder, or if a sub-folder (a folder within a folder) is required
highlight the top level folder.
2. Click the right mouse button and select the Add Image Server option.
3. Enter the IP address of the CamVu Mini Dome Camera. Enter a suitable name
to identify the camera in the Site list.
4. Click OK to enter these parameters. A shortcut to the camera will be displayed in the Site List.
Alternatively, the IP address of the camera can be entered into the dialog box on the
bottom of the Image Server Tree pane. This will create a temporary connection to the camera.
This can be made permanent by dragging the Entry into the Stored Image Servers folder.
These basic instructions will display the camera for viewing and control. For more information on the options
available, refer to the NetVu ObserVer documentation.
7.3
Note: If a video account has been congured on the camera, a username and password will be
requested when NetVu ObserVer connects.