Operating Instructions and Installation Instructions

CamVu Mini Dome

A Connection to DVR/NVR/Switch

B Connection to suitable 48Vdc 15W PSU - (DM/PSU/48V)

C Ethernet cable connection to camera.

Important: 48V is supplied to connection C. There is no voltage at Connection A. Do NOT connect

an ethernet cable from connection C to a DVR/Switch as this could cause irreparable damage.

ETH-D ETH-C ETH-B ETH-A

10/100 PORTS 10/100 PORTS

1/2 3/4 5/6 7/8 9/10 11/12 13/14 15/16

+48V

Note: Layer 3 Enhanced Switch shown, normal Ethernet switch or DVR/ NVR connection also

compatible. CamVu2000 camera shown, RJ45 socket on dome is compatible.

POE Injector Power Supply specication

Adaptor socket - 5.5mm diameter with a 2.1mm central circular pin

+48V goes to the centre pin of the power connector - 0V to the outside barrel