User guide
Dedicated Micros ©2011
69
CamVu D500 Minidome
Global Activity Mode Select ‘Always Active’ for Detection to operate constantly
Activity Channel This is a drop down list of the video inputs on the unit, selecting an
input will display images from the corresponding video source.
Activity Sensitivity This option allows the sensitivity setting to be established for the
activity grid being congured. There are ve settings to choose from:
Indoor High, Indoor Low, Outdoor High, Outdoor Low, Very Low.
Grid Editor Use the Grid Editor by placing cells in areas of the camera view
where movement will trigger an alarm. To enter cells navigate across
the image via the Directional buttons of the I.R Remote Control). If
viewing on a local monitor place a cell by pressing the OK button.
If viewing via the remote conguration pages, use the mouse to
navigate across the image, use the left mouse button to place a cell.
Reload Img (Red) This option will update the still image displayed in the Grid Editor.
Set All (Green) This option will insert a default square of 16 x 16 cells across the
displayed video image.
Clear All (Yellow) This option will clear all entered cells.