User guide

CamVu D500 Minidome

Alarm Response

This menu enables response conguration following activity trigger on the camera channel.

VMD Pulse Extension The pulse extension extends the trigger period to avoid double

triggers of VMD occurring, i.e. If a second incident of VMD is

received, after the rst alarm is nished but within this period, the unit

will not create a new event.

Channel Select the camera input for conguration from the drop down list.

Detection Type Each camera input can be congured for either ‘VMD’ or ‘Activity’

detection. To assign no detection settings to the camera, select ‘None’

Note: Whichever Detection option is selected here, will result in the camera channel being only

available for editing in the relevant conguration menu i.e. if Activity is selected

; this channel can

only be edited for Detection in the Activity Setup menu and not the VMD Conguration menu.

Activity To Trigger Following Activity activation, select ‘Simple Response’ to trigger

specic chosen responses from the options detailed below. Select

‘Zone’ to apply the Zone Input rules as congured in the Zone Input

menu, refer to ‘Zone Input’ for more information.

Note: When Activity to Trigger is set to ‘Zone’; the options detailed below are unavailable.

Create Database Entry When selected, an alarm entry will be added to the Event database.