User guide

CamVu D500 Minidome

POE Injector Cable

The POE Injector cable is designed to enable the use of POE (Power over Ethernet) before a POE capable

switch has been installed. It is installed alongside a suitable 48Vdc PSU that can supply 15W is required -

DM/PSU/48V can be purchased separately from Dedicated Micros.

A Connection to DVR/NVR/Layer 3 Enhanced CCTV Switch

B Connection to suitable 48Vdc 15W PSU - (DM/PSU/48V)

C Ethernet cable connection to camera.

Important: 48V is supplied to connection C. There is no voltage at Connection A. Do NOT

connect an ethernet cable from connection C to the DVR/Layer 3 Enhanced CCTV

Switch as this could cause irreparable damage.

POE Injector Power Supply specication

Adaptor socket - 5.5mm diameter with a 2.1mm central circular pin

+48V goes to the centre pin of the power connector - 0V to the outside barrel