User guide

CamVu D500 Minidome

Applet Location The location of the unit’s Viewer menu applet is displayed. The default

location will always be the applet installed on the unit. If accessing

multiple units via a remote connection, all can be assigned the same

Viewer applet. This will lessen the load time required when accessing

different systems.

For example, if a local unit and a remote DVR are to be accessed, it

is possible to set the Applet location for both DVRs as the local unit.

If viewing the unit remotely, Dedicated Micros provide a remote applet

located on the Dedicated Micros website (www.dedicatedmicros.

com/software_release/windows/viewer-applet.jar). Due to possible

bandwith restrictions on the network the DVR is located, using this

remote applet may improve data transfer speeds.

Set Location Select the applet location. Choose from ‘Default location’ i.e. the

applet installed on the unit; or the ‘Dedicated Micros website’

option i.e. the remote applet.

Reset (Red) This button will restart the unit.

Refresh (Purple) Refreshes the current page