Operating instructions

draft

DV-IP HD

Unit Operation

The DV-IP HD unit can be operated via the Viewer menus and the enclosed IR Remote Control, the

optional keyboard or with a USB mouse. They can also be viewed and accessed remotely via the

web pages and the ‘Go To Viewer’ menu option.

Operating the Viewer

Navigation is via a colour coded softkey system. The coloured menu provides an intuitive approach

to operator and installer use. The coloured keys on the IR Remote Control correspond to the menu

options displayed on screen.

Note: The screen images shown throughout this section are those displayed on a local monitor. If

viewing remotely via the web pages, the menu layout will differ slightly.

The function of the keys will change according to whether the unit is in Live or Playback mode.

Below are described the available Viewer menu pages.

View Control

Red Full Show currently selected camera full screen, and

will connect to the next connected camera on the

selected system.

Green Quad

Displays four images on-screen, putting the

currently selected camera in the top left hand

corner of the four, and will increment all cameras

by one if pressed again i.e. if cam 1 is shown

top left, cam 2 top right etc. then the views will

increment to cam 2 top left, cam 3 top right etc.

Note: When a camera button is pressed to select a new camera, the new selection will be

displayed in the top left hand corner of the display. The next three connected cameras will

be displayed in the following three positions.