Operating instructions

draft

DV-IP HD

Web Cam

Any of the video inputs on the unit can be made available for transmission to a webserver via FTP.

These images can then be incorporated into a web page and accessed via a standard web browser.

WEBCAM Server IP URL or name This is the IP address, URL or Domain Name of the

WEBCAM Server. Images will be uploaded from the unit to

this server at specied time intervals.

WEBCAM Root Drive Directory This is the main/root directory on the webcam server where

the image directory will be located.

WEBCAM Image Directory This directory will be created when the initial image is

uploaded to the webcam server, it is the directory where all

images will be saved on the server.

Image Filename Prex This is an identier for images sent from this unit and will be

stored as a prex to the le name.

Username

If it is necessary to use an authentication process to access

the webcam server, enter the relevant username here.

Password If it is necessary to use an authentication process to access

the webcam server, enter the relevant password here.

Update Interval This is the minimum update interval between each image

transmitted from the unit.

Camera

This allows individual video inputs to be enabled for

uploadng to the webcam server.

Webcam Enable The webcam function can be: ‘Always Enabled’, ‘Enabled

when system SET’, ‘Enabled when system UNSET’ or

‘Disabled’.

Webcam Resolution

Select the webcam resolution settings to best match the

monitor settings of the operator receiving the images.