Operating instructions
draft
Dedicated Micros ©2008
70
DV-IP HD
Global Relays
This menu details how to congure the default relay actions supported on the unit.
The unit supports ve onboard relay connections and global relay settings. These global relays
can be triggered under specic conditions i.e. on receipt of any alarm or any notication of Activity
Detection.
Image Protection Period Select a time period (in days) that images associated with an
alarm will be protected from deletion.
Alarm Display Mode When a relay has been triggered, the primary camera associated
with that relay can immediately be displayed on the local monitor.
Select ‘Jump To Primary Camera’ from the drop down list to
activate this function.
Alarm (Relay 1) Select this option to establish any alarm trigger as a Global Relay.
Therefore the relay will close when an alarm is received on any of
the alarm inputs.
Activity (Relay 2) Select this option to establish any Activity Detection trigger as
a Global Relay.Therefore the relay will close when Activity is
identied on any of the camera inputs.
Camera Fail (Relay 3) Select this option to establish any camera fail trigger as a Global
Relay.Therefore the relay will close when there is notication
on the system that any of the enabled video inputs has camera
failure (no 1V pk-to-pk signal).
System Set (Relay 4) When selected, the unit will automatically switch to Set mode
following relay activation.
Dial on Alarm (Relay 5) When selected, the unit will automatically connect to the
designated Remote Video Monitoring Centre following relay
trigger.