Operating instructions

draft

DV-IP HD

Activity Response Setup

This menu enables response conguration following activity trigger on a selected camera channel.

Note: The responses will only activate when ‘Simple Response’ is selected in the Activity

Conguration menu.

This option should be used in conjunction with the Activity Setup menu.

Channel Select the camera input for conguration from the drop down list.

Copy To All Select to copy the current Activity Response settings to all camera

channels.

Create Database Entry When selected, an alarm entry will be added to the Event

database.

Prole Change Select to switch to Prole recording mode upon alarm activation.

Alarm Reporting

This must be enabled for the unit to automatically connect on

alarm.

Alarm 24Hr This will ensure that Activity Detection is permanently enabled on

this camera channel.

Protect Alarm Images

Select to automatically protect alarm images from being overwritten

Switch Spot Monitor Enable this option to display alarm activated cameras on the

connected Spot Monitor.

Enable in Day (Unset) This will enable Activity Detection when the unit is in Day (Unset)

operation mode.

Enable in Night (Set) This will enable Activity Detection when the unit is in Night (Set)

operation mode.

Enable in Weekend (Override) This will enable Activity Detection when the unit is in Weekend

(Override) operation mode.