Operating instructions

draft

DV-IP HD

Edit Mode Leave set as ‘Normal’. Different Edit Mode functions will be added

following future development.

Edit Action Select ‘Invert’ to change the current grid state i.e. Clear to Set.

Select ‘Clear’ to remove grids or select ‘Set’ to add grids.

Activity Detection Select ‘Enabled’ to activate the Activity Detection feature.

Activity Sensitivity

This option allows the sensitivity setting to be established for the

activity grid being congured. There are ve settings to choose

from: Indoor High, Indoor Low, Outdoor High, Outdoor Low, Very

Low.

Activity To Trigger Folliowing Activity activation, select ‘Simple Response’ to trigger

specic chosen responses. Refer to ‘Activity Response Setup’ for

more information.

Select ‘Zone’ to apply the Zone Input rules as congured in the

Zone Input menu. Refer to ‘Zone Input’ for more information.