Operating instructions

draft

DV-IP HD

Activity Setup

The unit supports Activity Detection on all video inputs. It enables cameras to automatically detect

any movement/changes within the video scene; this can trigger a number of operations such as FTP

alarm notication and an increase in recording rate.

A still image of the selected camera will be shown in the Grid Editor screen. To establish an Activity

zone, edit the cells displayed across the image.

This option should be used in conjunction with the Zone Inputs and Zone Actions menus.

Global Activity Mode Three options are available for Activity activation.

Selecting ‘Active while at Preset’ will result in Activity mode

functioning only when the camera is at preset position 1. Select

‘Active while camera not in motion’ for Activity mode to function

only when the camera is still. Select ‘Always Active’ for Activity

mode to be in constant operation.

Activity Channel This is a drop down list of the video inputs on the unit, selecting

an input will display images from the corresponding video source.

Grid Editor Use the Grid Editor by placing cells in areas of the camera view

where movement will trigger an alarm. To enter cells navigate

across the image via the Directional buttons of the I.R Remote

Control (if viewing on a local monitor). Place a cell by pressing

the OK button. If viewing via the web pages, use the mouse to

navigate across the image, use the left mouse button to place a

cell.

Reload Img (Red) This option will update the still image displayed in the Grid Editor.

Set All (Green)

This option will insert a default square of 16 x 16 cells across the

displayed video image.

Clear All (Yellow) This option will clear all entered cells.