Operating instructions
draft
Dedicated Micros ©2008
65
DV-IP HD
Zone Actions
This menu allows actions to be allocated to individual alarm zones; Primary and Secondary cameras
can be allocated to the zone and actions undertaken following alarm activation. This page should be
congured in conjunction with the Zone Inputs menu.
Image Protection Period This is the time period in days that the alarm images will be
protected. When this time period has elapsed the images will
automatically be overwritten.
Alarm Display Mode If ‘Jump To Primary Camera’ is selected, the Viewer will display
images from the primary camera in the alarm zone on receipt of
the alarm. Select ‘No Action’ to disable this feature.
Zone Select a zone (alarm) to congure.
Primary Camera
This allows a camera to be assigned as the primary camera
associated with the Alarm Zone. The feed camera will be shown
when an alarm in this zone is triggered.
Secondary Cameras This setting gives the facility to assign additional cameras to the
zone. These cameras will become part of the alarm sequence
shown in the Viewer menus when the alarm zone is triggered.
Create Database Entry An alarm entry will be added to the database, the zone title will
be used as part of the entry information. Refer to ‘Zone Input for
more information’.
Prole Change Select to switch to Prole recording mode upon alarm activation.
Alarm Reporting
This must be enabled for the unit to automatically connect on
alarm. This will enable the unit to send an alarm notication to an
external destination i.e. an Email, PPP message or text alarm.
Add Still Image This will record a still image of the trigger along with the standard
recording. This can then be sent on to an external destination.
Protect alarm Images
Alarm images can automatically be protected from being overwritten
.