Operating instructions

draft

DV-IP HD

Nuisance This is a repetitive detector value. When an alarm is received

on the unit, it will store the alarm time and monitor the number

of times the same detector is triggered within an hour period.

If the detector is triggered the set number of times to activate

the nuisance count, the unit will de-activate this detector from

triggering an alarm for an hour. The unit will continue to monitor

the detector and check how many times it is triggered during this

period. If it is again triggered more than the amount set in the

nuisance counter, it will remain de-activated for another hour. This

will continue until the trigger value falls below the nuisance count

setting. To disable this feature, leave the setting as ‘0’.

Stuck Time If any of the alarms/detectors are active for a period longer than

specied, these will automatically be omitted. This time period is

set in minutes.

Note: The arrow button displayed next to each textbox allows settings to be replicated for those

cameras listed below. This will only affect the adjacent option i.e. Enabled arrow will

replicate the Enabled setting to cameras below the clicked arrow.