Operating instructions

draft

DV-IP HD

Advanced Record

Note: When Advanced Record settings have been changed, it is not possible access the Simple

Record menu until the newly congured Advanced Record settings have been applied. To

do this, open the Record menu and select the ‘Multimode’ option. It will then be possible to

return to the Prole Record menu and access Simple Record.

Menu View

Switch to the Simple Prole Record menu

Days Recording Displays the record duration possible using the current

conguration.

MPEG4 Compression If using MPEG4 recording, edit the number of P-Frames recorded

before a new I-Frame (keyframe) will be taken.

Channel Enables selection of a specic camera for editing.

Copy To All

Select to copy the current prole record settings to all camera

channels.

Pre-Trigger Rate (pps) The Pre-Trigger feature will buffer and store alarm recording prior

to an event trigger. It will use the maximum available memory

dependent on other cameras requirements of the buffer space.

Enter the record rate (in pps).

Unset/Set/Override Normal Shows the recording prole used by the camera if no Timed

Schedules are applied and the camera is operating under Normal

(non Event) conditions. Refer to ‘Schedule’ for further information.

Unset/Set/Override Event Shows the recording quality that will be used by the camera

during an Alarm or Event. Note that Set and Override schedules

will be used only when Timed Schedules are applied. Refer to

‘Schedule’ for further information.

Comp Select image compression format (MPEG or JPEG).

Res Select image size (QCIF, CIF, 2CIF or 4CIF).