Operating instructions

draft

DV-IP HD

Pre-Trigger Enablng the Pre-Trigger feature will buffer and store alarm

recording prior to an event trigger. It will use the maximum

available memory dependent on other cameras requirements

of the buffer space. Select ‘Enable’ to activate.

Pre-Trigger Duration (secs) The Pre-Trigger Duration is the maximum possible time that

data will be stored prior to an event trigger.

Unset/Set/Override Normal Shows the recording prole used by the camera if no Timer

Functions are applied and the camera is operating under

Normal (non Event) conditions. Refer to the ‘Schedules’

section for further details.

Unset/Set/Override Event Shows the recording quality that will be used by the camera

during an Alarm or Event. Note that Set and Override

schedules will be used only when Timed Schedules are

applied. Refer to the ‘Schedules’ section for further details.

Comp Select image compression format (MPEG or JPEG).

PPS The accompanying dropdown list allows the number of frames

captured per second to be set.

The pictures per second (pps) options allow either 6, 5, 2, 1,

0.5, 0.35 or 0.1 pps to be recorded.

Pictures can also be recorded at ‘Real Time’ speed, ‘3/4 Real

Time’ or ‘1/2 Real Time’.

To disable record, choose the ‘No Record’ option.

Select ‘User Dened’ to use settings established in the

Advanced Prole Record menu.

Quality The accompanying dropdown list allows the quality of

recorded images to be set. Select from Maximum, High,

Medium, or Low. Select User Dened to use setting

established in the Advance Prole Record menu.

Note: The higher the Quality setting, the greater the storage space used.